Cart 0

Hardwax Oil - 2.5L







WOCA Hardwax Oil is used for oil finishing of wooden floors manually or with polishing machine.

  • Suitable for all types of wood floors
  • Suitable for large areas
  • Filmbuilding
  • Certified by IBR

Product details

WOCA Hardwax Oil is used for oil finishing of wooden floors manually or with polishing machine. The oil ensures an extremely hard-wearing and light film-building surface. WOCA Hardwax Oil is ideal for basic finishing of any unfinished, new and newly sanded interior woodwork, or for topcoat on WOCA Colour Oils. Polishing machine is recommended for the polishing of bigger areas.

  1. The floor can be cleaned with WOCA Wood Cleaner mixed with water 1:40 if necessary. Leave floor to dry fully before oil application.
  2. Stir and mix oil container well before and during use. Containers with different batch numbers should be mixed before use to avoid colour differences.
  3. Apply the oil in a thin layer with a short-haired roller or similar in an even coat. Leave the oil to be absorbed for 20 minutes.
  4. The area is now polished with white or beige polishing pad under doodle-bug or with polishing machine until the excess oil is polished in, and the area appears saturated.
  5. Leave the floor to dry for 8-10 hours.
  6. If necessary a second coat can be applied. Follow step 3-5.
  7. Tools may be cleaned with WOCA Solvent.
  8. The floor can be used with care the next day and is fully hardened after 3 days at normal indoor conditions. Do not clean the floor until fully har­d­ened.
  9. After the hardening time, the floor should be cleaned with Natural Soap or Oil Refresher, which leaves a protecting layer on the surface.

Regular cleaning: Natural Soap or Oil Refresher. Re-oil with WOCA Hardwax Oil or Maintenance Paste when required.


Technical data

Product properties
Form: Liquid
Flash point: 66
Density: 1
Coverage: 8-12 m2/litre
Colours: Natural and extra white.
Odour: Faint
Application tools: A polishing machine with beige or white polishing pad. Paintroller and cotton cloths.
Cleaning of tools: Clean tools with Solvent.
Disposal: Dispose of this material and its container to local disposal facility for chemical waste.
Available pot sizes: 0,75 litre and 2,5 litre.