Cart 0

Worktop Oil







 Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces.

  • Provides a dirt- and water resistant surface
  • Suitable for both light and dark types of wood
  • Enhances the colour of the wood
  • Components are FDA approved
  • Coverage approx. 150 SF/L

Product details

Worktop Oil is designed for untreated or previously oiled/sanded wood surfaces. The oil makes the surface water and dirt repellent. Use Worktop Oil, Natural, on both dark and light wood species – such as mahogany, merbau, teak, cherry, ash, oak, beech, maple, birch, pine etc. - to give the wood a mellow, golden colour. Use Worktop Oil, White, to lighten up the wood or give it a whitewashed effect. Ensure good ventilation at all times during the application and drying time.

How to...


  1. If the surface is particularly smooth, sand the surface with sandpaper grit 180.
  2. Make sure the wood is dry and devoid of any dirt or grease. Clean the wood with Wood Cleaner. After cleaning, let the tabletop dry for at least 8 hours.
  3. Stir the oil thoroughly before use.
  4. Use a paintbrush to apply a suit­able amount of oil in an even, adequate coat.
  5. Wait approx. 20-30 minutes at 20ºC as the oil penetrates into the wood. If necessary, sand the wood while the surface is still wet with oil. Sand wet in wet lengthwise the wood grain with sandpaper grit 320-400.
  6. Next, wipe off all excess oil using a lint-free cotton cloth. Do not leave any excess oil on the surface.
  7. Carefully polish the wood using a white polishing pad, which makes the surface more hard-wearing.
  8. Repeat the treatment on highly absorbent surfaces.
  9. The oil is thoroughly hardened after 24 hours at 20ºC. Do not let the tabletop become wet during the hardening process.

Use Worktop Oil to maintain the tabletop four times a year, or as often as necessary. Before starting the maintenance procedure, clean the worktop using Wood Cleaner, and let the surface dry for at least 8 hours. Follow the procedure in items 2 through 7, but apply only one coat of oil.


Technical data

Product properties
Form: Liquid
Flash point: >100
Density: 0,9-1,1
Coverage: 12-15 m2/litre
Colours: Natural and white.
Odour: Faint
Application tools: Brush, roller or lint-free cotton cloths. Possibly oil-wetted -sanding paper 320-400 grit and white polishing pad.
Cleaning of tools: Clean tools with Solvent.
Disposal: Empty containers and residues to be disposed of according to local regulations. 
Available pot sizes: 0,75 litre